Standard size, high quality kevlar drive belt, designed in Japan to OEM standard or higher. Replace belts every 3000-5000km to maintain optimum acceleration and top speed, and to avoid breakage. 1mm wear on the side of a belt can cost 3km/h top speed.
To suit the 100cc Yamaha models below
YW100, BW'S 100 / Bee Wee 100 / Zuma 100 (all)
Grand Axis 100 (all)
These belts are designed and/or manufactured in Japan by a major manufacturer to strict quality standards. All drive belts must be run in before normal use by keepng speed under 30km/h for at least the first 5km. We strongly recommend you download and read our 'Drive belt fitment' pdf, in the 'Manuals & User guides' category of this shop. Claims regarding premature drive belt failure will only be considered if you have downloaded that file. Sample image shown