Welcome

Drive Belts

Grid List

Set Descending Direction

1-10 of 64

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. Honda Lead 100 drive belt OEM
    NZ$89.00
    New drive belt made by Honda Japan. Drive belts need to be replaced periodically to avoid breakage and maintain performance. This is a genuine Honda part, to suit the following models: Honda Lead 100cc (SCV100, 4 stroke) from 2005 on. Replace belts every 6,000km to maintain optimum acceleration and top speed, and to avoid breakage. 1mm wear on the side of a belt can cost 3km/h top speed. These belts are designed and manufactured in Japan by a major manufacturer to strict quality standards. This drive belt must be run in before normal use by keepng speed under 40km/h for at least the first 5km. Learn More
  2. Honda scooter v-belt drive
    NZ$51.75
    No longer available new from Honda. We will replace this in due course with an aftermarket part, sign up to get notified when available by using the link on this page. New scooter drive belt made by Honda Japan. These v-belts need to be replaced periodically to avoid breakage and maintain performance. This is a genuine Honda part, part number 23100-GAB-003 (same as 23100-GAB-0030 ) Suits old Honda scooters including AF17 Pal and DJ-1 (with AF05E engine) Learn More
  3. Drive belt suit Peugeot, TGB
    NZ$68.90
    V-belt from the famed Malossi brand. Top quality item for durability and value. Suits the scooters below Peugeot Speefight, Ludix Blaster / Snake etc 2 stroke 50cc TGB Bullet, Bullet 2.0 TGB Delivery TGB 101s, 303r 2t 50 models Learn More
  4. Yamaha drive belt, 2T horizontal
    NZ$65.00
    Made in Europe by Dayco, a very large and reliable manufacturer of auto parts. Suit most 50cc 2 stroke horizontal Yamaha scooter engines including clones. Note the length of this is 792mm so is slightly shorter than the standard for Yamaha CV50 Jog. For CV50, see 7020-SS instead. Learn More
  5. V-Belt suit Leader 180/200cc 4T
    NZ$99.00
    This kevlar belt by Malossi is reasonably-priced and performs excellently. These belts are made and tested to very high standards. Good upgrade for standard or tuned bikes. Replace belts periodically in accordance with manufacturer's recommendations to maintain optimum acceleration and top speed, and to avoid breakage. 1mm wear on the side of a belt can cost 3km/h or more top speed. To suit the Piaggio Leader 180cc / 200cc 4 stroke models below: Vespa GT200 Granturismo GT , GTL '03- Gilera Runner VXR 180 / 200 4T Aprilia Atlantic Piaggio X8 / X9 Learn More
  6. Kevlar belt Yamaha upright
    NZ$68.00

    Standard size kevlar drive belt, made in Japan. Replace belts every 3000-5000km to maintain optimum acceleration and top speed, and to avoid breakage. 1mm wear on the side of a belt can cost 3km/h top speed.

    Suits most 50cc 2 stroke vertical Yamaha scooter engines plus clones:

    • Yamaha BW's 50 (3AA) with upright cylinder
    • Yamaha Gear 2T (UA03J)
    • Bug Bandit with horizontal 2 stroke 50cc engine
    • MBK Booster 50
    • Aprilia Gulliver 2t 50 LC

    Replaces OEM part number 3AA-17641-00 and others. Designed and manufactured in Japan by a major manufacturer to strict quality standards. All drive belts must be run in before normal use by keepng speed under 30km/h for at least the first 5km.

    Learn More
  7. Hyosung SF50 Drive Belt
    NZ$85.00
    Made in Europe by Dayco, a very large and reliable manufacturer of auto parts. Suits the Hyosung SF50 "Fast" scooter. Learn More
  8. belt Adly SF-50 silver fox scooter
    NZ$67.00
    Factory standard (Japanese made) v-belt for GTC-50 'Gatecrasher' and some Adly Silver Fox 50 (SF-50). These are an excellent quality belt and usually should be replaced every 5,000 - 7,000km to keep your bike in prime working condition. This part suits the scooters: Adly GTA-50 2012 on Adly GTC-50 Gatecrasher 2010 on Adly SF-50 Silver Fox with chassis beginning with RFLDSF05ACA only May have 23100-116-000 on the original belt. For other SF-50 not covered above search for 23100-117-000 on this online shop Learn More
  9. Drive belt for Honda type 1 - standard
    NZ$39.90

    Replace belts regularly to maintain optimum acceleration and top speed, and to avoid breakage. 1mm wear on the side of a belt can cost 3km/h top speed. Not recommended for high power bikes. For high power scooters or race applications choose KN7011-SS from this category.

    Standard size and quality for Honda upright engines including:

    • AF27, AF28 SR Dio (Not ZX)
    • AF34, AF35 SR Dio (Not ZX)
    • AF18, AF25 Dio AF24, AF31
    • Tact AF24
    • Giorno AF24 (2 stroke)
    • DJ1-RR

    Standard use belt designed in Japan and manufactured in Taiwan.

    Learn More
  10. Honda OEM v-belt drive scooter
    NZ$55.78
    New scooter drive belt by Honda Japan. These v-belts need to be replaced periodically to avoid breakage and maintain performance. This is a genuine Honda part, to suit the following models with AF05E engine: Nifty 50 / Eve / Spree (NQ50 with AF05E engine) Tact Fullmark AB06 Replaces factory part numbers: 23100-GK8-870 23100-GK8-003 23100-GK8-0030 23100-GK8-004 Learn More

Grid List

Set Descending Direction

1-10 of 64

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5