Welcome

Air Filters

Grid List

Set Descending Direction

1-10 of 37

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  1. Performance pod filter 50mm
    NZ$22.99
    OK for racing! These pod filters are especially designed for performance improvements by allowing higher intake flow. Awesome chrome body, washable mesh/cotton design. Gives more intake sound than standard. Highly recommended when using big bore upgrades, also gives more performance on standard scooters/bikes. 48mm rubber fitting, will fit many scooters and performance carburetors with a 47-51mm outside diameter on carburetor mouth. Washable and reusable. Carburetor setting may be required if replacing an airbox. Learn More
  2. KB2 Performance pod filter 35mm foam
    NZ$35.99
    OK for racing! Water resistant and washable! These pod filters were specifically manufactured for increased performance on scooter carburetors. The mouth size is 35mm and will complement other performance mods on most 50cc carbs (and bigger engines with 35mm mouth carbs) perfectly. This KB2 model is internally ribbed for airflow over the whole element, while keeping rain/mud off. Gives more intake sound than standard. Carburetor setting may be required if replacing an airbox. Highly recommended when using big bore upgrades, also gives more performance on standard scooters. The internal foam element is washable and reusable. 35 degree angle joint, comes with hose clamp for fitment. Testimonial: "It goes very well... it keeps pulling in the mid range... It sounds a lot better. I'm very happy with it"  P.R., Auckland (fitted to Piaggio Liberty with #85 main jet) Learn More
  3. Big airbox duct for Yamaha / Minarelli / Chinese intake
    NZ$9.90
    Ok for racing! This duct replaces the factory airbox duct on practically all 2 stroke Yamaha scooters 50cc - 90cc, plus Minarelli and Chinese clones including CPI Hussar / Oliver CIty, CMG, FYM etc. It has a much bigger flow area than standard Yamaha parts and can help your scooter accelerate faster / reach higher top speeds. Good for riders who want more flow and performance without the extra noise that a pod filter gives. Learn More
  4. Doppler performance air filter
    NZ$59.99
    From the French performance parts maker Doppler comes this interesting power filter. It has three ducts in, two of which are blanked off at factory and can be opened for more flow (and more noise!). Employing Bernoulli's Principle, this filter has been specifically designed to improve induction at all engine speeds. Resembling a normal pod filter in shape, it has a clear cover and ducting to improve air flow while not being as noisy as a regular pod filter. It is also more resistant to water soak than other pod filters. Mounting size 36mm (also comes with reducer for fitting to 28mm diameter carbs) Learn More
  5. Performance pod filter 40mm
    NZ$22.99
    OK for racing! These pod filters are especially designed for performance improvements by allowing higher intake flow. Awesome chrome body, washable mesh/cotton design. Gives more intake sound than standard. Highly recommended when using big bore upgrades, also gives more performance on standard scooters. 40mm rubber fitting, will fit many scooters and performance carburetors with a 38-41mm outside diameter on carburetor mouth. Washable and reusable. Carburetor setting may be required if replacing an airbox. Testimonial: "thanks for the correct jet which is now installed with the pod filter on the scooter, and going well! ... Quite surprising the difference it makes. It will lift the front wheel..." N.C., Rotorua Learn More
  6. M65 Performance pod filter 35mm
    NZ$34.99
    Especially designed for performance improvements by allowing higher intake flow. This M65 filter features a K&N style cotton mesh, and is covered by a blue tinted clear plastic cover. The slightly longer, 45 degree curved rubber joint solves the problem of other pod filters that used to get soaked by carb reversion - meaning more consistent performance for longer! Lightweight, water resistant, so it is safe to use in the rain. Gives more intake sound than standard. Highly recommended when using big bore upgrades, also gives more performance on standard scooters. 35mm mouth, will fit practically any 50cc scooter, and most scooters up to 180cc if they have a 35mm outside diameter on carburetor mouth. Washable and reusable. Carburetor setting is often required if replacing an airbox. Learn More
  7. Performance pod filter 35mm
    NZ$22.99
    OK for racing! These pod filters are especially designed for performance improvements by allowing higher intake flow. Awesome chrome body, washable mesh/cotton design. Gives more intake sound than standard. Highly recommended when using big bore upgrades, also gives more performance on standard scooters. 35mm rubber fitting, will fit many scooters and performance carburetors with a 34-37mm outside diameter on carburetor mouth. Washable and reusable. Carburetor setting may be required if replacing an airbox. Testimonial: "thanks for the correct jet which is now installed with the pod filter on the scooter, and going well! ... Quite surprising the difference it makes. It will lift the front wheel..." N.C., Rotorua Learn More
  8. Performance pod filter 28mm
    NZ$22.99
    OK for racing! These pod filters are especially designed for performance improvements by allowing higher intake flow. Awesome chrome body, washable mesh/cotton design. Gives more intake sound than standard. Highly recommended when using big bore upgrades, also gives more performance on standard scooters. 28mm rubber fitting, will fit many scooters and performance carburetors with a 26-31mm outside diameter on carburetor mouth. Washable and reusable. Carburetor setting may be required if replacing an airbox. Testimonial: "thanks for the correct jet which is now installed with the pod filter on the scooter, and going well! ... Quite surprising the difference it makes. It will lift the front wheel..." N.C., Rotorua Learn More
  9. Big air funnel / mesh screen racing
    NZ$37.90
    OK for racing! From Japanese tuning house Kitaco, this is a high flowing, high performance air funnel for maximum airflow to your big carburetor. Suits many big carbs like PWK , PE type, Mikuni TM/TMX etc, Dell'Orto VHST etc and others with 50mm diameter filter mount. This has just a simple mesh screen so stops foreign bodies entering but not microscopic particles. Learn More
  10. Stage 6 pod filter 50mm, angled
    NZ$48.00
    This Stage 6 brand foam pod filter looks good, is light and gets the air in! Its also compact, important for those builds on scooters where bigger carbs reduce the available space. More air = more power! (and more noise RAAAH!) Requires rejetting in most cases (bigger main jet). This size will fit TM, TMX, PWK carbs and others with 48mm - 50mm carb mouths. Washable and reusable Learn More

Grid List

Set Descending Direction

1-10 of 37

Page:
  1. 1
  2. 2
  3. 3
  4. 4