Racing intake manifold for use with PWK type carburetors (or any with 34mm connection). Suits 19mm - 28mm carbs, especially recommended for tuned / big bore engines but will run on standard bikes too with correct carb setting. Rubber insulator with hose clamp, vacuum fittings for fuel pump etc.
More air and fuel = more power!
AF34 Honda Dio chassis AF34-2000001 on
AF35 Honda Dio chassis AF35-1500001 on
Or you can check the model code under the seat: SK50M V/ Y/ M1/ M2
Any other AF34E engine with this 3 bolt manifold