Budget standard size, non kevlar drive belt. If this is run in properly it is a good wearing, bargain priced belt. Replace belts regularly to maintain optimum acceleration and top speed, and to avoid breakage. 1mm wear on the side of a belt can cost 3km/h top speed. Not recommended for high mileage bikes. For high mileage bikes or race applications choose KN7011-SS from this category.
Suits Hondas including some Dio, Giorno etc. Sample image shown. Please choose your model from the options below.
This is a budget standard use belt manufactured in Taiwan. All drive belts must be run in before normal use by keepng speed under 30km/h for at least the first 5km. We strongly recommend you download and read our 'Drive belt fitment' pdf, in the 'Manuals & User guides' category of this shop. Claims regarding premature drive belt failure will only be considered if you have downloaded that file.