High quality Dayco standard size drive belt made to OEM or higher specification. Replace belts every 3000-5000km to maintain optimum acceleration and top speed, and to avoid breakage. 1mm wear on the side of a belt can cost 3km/h top speed.
AZ50 (all 2 stroke)
Let's 2 stroke
Let's II / Let's II S / G / L / DX (CA1KA any pre-emissions control model)
CA1PA Let's II (post-emissions control)
Suzuki part number is 27601-43E00. R163750170
These belts are designed and manufactured by a major manufacturer to strict quality standards. All drive belts must be run in before normal use by keeping speed under 30km/h for at least the first 5km. We strongly recommend you download and read our 'Drive belt fitment' pdf, in the 'Manuals & User guides' category of this shop. Claims regarding premature drive belt failure will only be considered if you have downloaded that file.