Compression ratio?

General discussion on culture, accessories styling and anything non tech.

Moderators: Hybrid, avai007, RobFromThePartsDept

Compression ratio?

Postby nlxon » Mon Dec 10, 2012 7:23 pm

I'm looking at increasing the cylinder compression in my JOG by removing the gasket and replacing it with some copper spray, after a squish test of course. Do I need to worry about the compression ratio?
2008 CV50 Jog, S-Drive Kit, 82g CNC Drive Face, +20% Clutch Springs, +20% Contra Spring, Snorkel removal with Hi-Flow Air-filter, 72kph (iphone GPS)
User avatar
Level 3 scooteriser
Posts: 46
Joined: Wed Sep 19, 2012 10:05 pm
Location: Christchurch

Re: Compression ratio?

Postby ae86guy » Wed Dec 12, 2012 6:25 pm

130 to 140 is a good range to be in just run 98 in it .People say not to run with out the headgasket but ive done it on several motors as a quick up grade and never had a problem with the copper coat letting go
Polini Corsa 72cc
Malossi full circle crank
Rare Scorpionpipe
CT intake 24mm oko
Disk brake swap
Top speed 115kmh(so far)
still needs lots of tuning
If I'm not posting I'm scootling
Posts: 339
Joined: Sat Sep 18, 2010 8:42 am

Return to Japanese Scooters general

Who is online

Users browsing this forum: No registered users and 4 guests