Page 1 of 1

Bag hook GPS mount

PostPosted: Sat Aug 17, 2013 7:56 pm
by motorcycler
This is how I made a GPS mount for my SYM Citycom. This may help others with scoots with a bag hook. I mounted half of a GPS mount to the bag hook of my scoot.
Image

these are the parts:1.) half of the GPS mount2.) two home made rubber washers for friction between the GPS mount and the U-bracket.3.) two washers to go under U-bracket4.) home made U-bracket5.) bolt to screw GPS mount to U-bracket
Image


this is how the U-bracket mount with the two washers underneath. I used the factory bolt to do it.
Image
Image


everything mounted with the mount in the everyday ride "out of the way" position
Image


GPS mounted with a hair band (what ladies use to make a pony tail in their hair) for safety.
Image


The bracket is spray painted black and looks professional IMHO. This way you can still use the bag hook and it is not in the way getting on or off. The GPS runs off the Aux power outlet. I put the GPS in a plastic Ziplock bag if it rains to keep it dry.happy Citycoming.....until next time.

Re: Bag hook GPS mount

PostPosted: Mon Aug 19, 2013 7:01 pm
by ae86guy
please join hondaspree.net and post some of these right ups there .sorry scootling but hondaspree is a far more active forum than this one .Many people could benifit from your right ups there

Re: Bag hook GPS mount

PostPosted: Mon Aug 19, 2013 7:01 pm
by ae86guy
please join hondaspree.net and post some of these right ups there .sorry scootling but hondaspree is a far more active forum than this one .Many people could benifit from your right ups there