PGO Tornado Lights Hi/Lo

scooters from other makers (not Italian or Japanese) tech or other discussion

Moderator: RobFromThePartsDept

PGO Tornado Lights Hi/Lo

Postby Scorched » Thu Jun 20, 2013 5:57 pm

I have just purchased a 1999 PGO Tornado 90cc, the headlights seem to be stuck on high beam.
I have checked the operation of the switch with my multi meter and it seems to be fine, the high beam light stays on whenever the headlights are turned on no matter if the switch is in the high or low position, BUT if I disconnect the headlights the high beam indicator light turns on/off with the switch.

What voltage should I be getting? And also how does the system work, is it meant to be one projector lamp for low beam and two for high beam? The lighting circuit has 3 wires that come together at the lights with only 2 wires to each light.

Any help would be greatly appreciated
Josh
Scorched
kickstarting
 
Posts: 2
Joined: Tue Jun 18, 2013 11:47 pm
Location: Palmerston North

Return to Other scooter discussion

Who is online

Users browsing this forum: Google [Bot] and 1 guest

cron